Ryoko name on your Wi-Fi list. Here are some easy steps to try, one at a time:

By scanning the QR code displayed on your Ryoko device screen to connect manually.

1. By scanning the QR code displayed on your Ryoko device screen to connect manually.

•  To bring up the QR code, press the Menu button  on the Ryoko device twice.

• Use your phone's camera to scan the QR code—you’ll be directed to the same screen shown in the image below.
  
  

• Tap “Connect” to open your Wi-Fi settings, then select the Ryoko device name from the list of available networks.

2. Reset the Ryoko device 

•  Use a proper tool, such as a paperclip or SIM card ejector.

•  Gently poke the reset hole for about 3–5 seconds.

• Once the reset is successful, your Ryoko Pro will automatically restart and return to its original factory settings.

• Kindly wait for 3-5 minutes before using the device.

3. Restart the device three times to see if the Wi-Fi name shows up.

• After about 5 seconds of holding the Power button the screen will light up and show the Power Off message. After another 5 seconds, the screen will light up again and show the Ryoko logo. This indicates that Ryoko was successfully restarted.

• Do this three times and check your device if Ryoko SSID is showing on the available devices for Wi-Fi.

Also, check if the Wi-Fi icon is visible at the top of your Ryoko screen. If it's not, try moving the device to a different spot.